Soap dispensers are everywhere, from your bathroom, kitchen sink, office restroom, and even the fancy hotel lobbies. And yet, somehow, using them without a mess still feels like a skill we were never taught in school. If you have ever ended up with a blob of soap on the counter, slippery fingers, or a puddle under the dispenser, don’t worry, because one, you are not alone, and second, we will guide you so it never happens again!
This is a guide on how to use soap dispenser systems without making a mess, so you can stay clean and keep your space mess-free!
First Things First: How Does a Soap Dispenser Work?
Before jumping into how to use a soap dispenser, it helps to know how the thing actually works. Basically, most common dispensers, whether you use manual or automatic ones like at Nova-Tech, all use a simple mechanism. When you press down, it creates a pressure that pushes up the soap through a tube and out the nozzles. In the automatic ones, a sensor triggers the pump when it detects your hand.
The goal here is to simply get the soap in your hand. The problem? Well, most people either press too hard, too fast, or hold their hands in the wrong spot under the dispenser. So, now let’s talk about fixing that!
Also Read: Why Every Bathroom Needs a Soap Dispenser: A Must-Have Essential – Novatech Automatic Systems
Step-by-Step: How to Use a Soap Dispenser Without Mess
Step 1: Check The Nozzle Position
This one sounds obvious, right? But a lot of messes happen because the nozzle is facing sideways, or has a dried-up soap blocking it. So, before you put all your arm pressure on it, take a quick look. Ideally, the nozzle should be facing down, over the sink, or directly over your palm. This way, you can protect it from landing on your shirt or, worse, your face.
Step 2: Position Your Hand Correctly
Now, you have to place your hand about 1-2 inches below the nozzle, not on the counter, not too far down. This way, you can catch the soap directly in your palm, without splashing it all around.
Step 3: Press Gently
One of the biggest mistakes when learning how to use a soap dispenser is pressing too hard or too fast. This is what leads to the disaster, aka, the splatter or overshooting. So, next time, do a firm press to ensure the right amount comes out, straight to your hand.
Step 4: Wipe If Needed
“Oops, I dripped the soap again!”
It is okay if you accidentally dripped the soap on the dispenser or the counter. All you have to do is wipe it right away. It is because once the soap hardens, or becomes sticky, it can make the whole unit look dirty over time, and might leave marks on the sink as well.
Step 5: Don’t Block The Sensor
But hey, if you are using the automatic dispensers, then make sure your hand is not blocking the sensor while adjusting the position. For these, you have to place your hand under the nozzle first, wait a few seconds for the sensor to activate, and then move away once it drops on your palm.
Also Read: How Automatic Soap Dispensers Support Better Hygiene
Bonus: How to Use a Liquid Soap Dispenser (Wall-Mounted or Pump Style)
Whether it’s a fancy stainless-steel unit or a basic plastic pump, the basics remain the same. But with a liquid soap dispenser, the key is to make sure the soap is thin enough to flow easily. If it is too thick, the pump may clog up, and shoot soap sideways (we’ve all been there).
So, for the pump-style dispensers, keep the nozzle clear as the buildup can cause blockages and mess. While for the wall-mounted dispensary, do not yank the lever, as a gentle push is more than enough to get the desired amount of soap out. However, make sure that whenever you refill, you do it very clearly and slowly to avoid overflows and dripping around the dispensers.
And that’s how to use liquid soap dispenser correctly with zero spills!
Also Read: Why Every Bathroom Needs a Soap Dispenser: A Must-Have Essential
Wrapping Up
One thing is for sure that using a soap dispenser properly doesn’t require an instruction manual taped to the wall. All it requires is a little attention, care, and some aftercare. If you keep forgetting how to use soap dispenser systems cleanly, just remember: to position, press gently, and wipe the mess (if any). That’s all it takes to keep your sink and soap-splashed shirt clean!
Understanding how a soap dispenser works helps you treat it right, and once you get into the habit of using your liquid soap dispenser correctly, you’ll wonder how you ever ended up with those countertop soap blobs in the first place.
However, if you want to play safe, there is nothing better than wall-mounted automatic soap dispensers, as all you have to do is catch the soap!
Clean hands, clean counter!
